Wire Wrapped Fairy And Dandelion

I have always enjoyed wire wrapping techniques when making my own jewellery, so when I came across this craft kit for making 3d forms I was super exctied. This starter kit comes with pliers but if you already have the supplies you can opt out of those in your kit and bring the price down. Once you have done a kit like this you can easily go on to create your own creations.

This Bundle includes 1 x FantasyWire 8″ Starter Kit and 1 x Fairy Wish.

This is everything you need for you to create a mini Dancing With Dandelions if you wanted to, you can use the starter to kit to make the fairy and adapt the Fairy wish to create the dandelion.

FantasyWire Fairy Starter Kit:
The ideal starter kit for beginners looking to try their hand at wire sculpture or a great gift for anyone who enjoys crafting. This kit give you the chance to make your own wire sculpture, it contains everything you need to have a go at making your own 8 inch wire fairy sculpture.

There are detailed instructions taking you through each stage of the wire fairy sculpting process stage by stage.

The preformed skeleton included within this kit is all in proportion for you already, so just simply adapt it to whichever fairy pose you wish to sculpt and apply the wire. There are three types of wire for you to use; thick for building out the figure, thin for adding the ‘skin/detail’ and finally springy wire to create your fairy’s wings. We have been sure to include more than enough wire within this kit so please don’t worry about running out.

Next Idea:

20 Ways To Use Scrabble Tiles In Jewelry Making

In the dimly lit corner of my small jewelry studio, the silver soldering torch hisses to life. The familiar scent of metal and flux fills the air. As a jewelry maker, I’ve always found a certain magic in the process of soldering. It’s the moment when separate pieces of metal, like puzzle pieces, come together to create a beautiful whole. Over the years, I’ve gathered my fair share of tips and tricks that have made this art form more of a delight than a chore. Here, I’ll share some of those secrets to help you master the art of soldering in your jewelry making journey.

1. Set the Stage for Success
Before diving into soldering, ensure that your workspace is well-organized and clutter-free. You need a clear and clean surface to focus on your work. Make sure you have all your tools and materials within easy reach. An organized workspace not only boosts efficiency but also minimizes the chances of accidents.

2. Fire Up the Torch with Confidence
The torch is often the heart of soldering, and it can be intimidating for beginners. When I was starting, I remember feeling nervous about lighting the torch. But here’s a tip: practice lighting and adjusting the flame without your jewelry piece. Get comfortable with the torch, and you’ll gain more control.

3. Understand the Three S’s: Surface, Solder, and Sweat
Surface preparation is key. Clean the metal surfaces you plan to solder meticulously. Use a brush or abrasive paper to remove any oxides or contaminants. Then, apply flux. It’s like a magical potion that prevents oxidation and helps the solder flow.

The solder itself comes in various forms: sheets, wire, and paste. Choose the type that suits your project best. For small, delicate joints, I prefer solder wire, as it’s easier to position accurately.

As for the ‘sweat,’ it’s the term for the moment when the metal reaches the right temperature, and the solder flows like liquid silver. It’s crucial to wait for this moment, rather than forcing the solder to melt. This requires patience and practice.

4. Master the Art of Heat Control
Controlling the heat is a skill that comes with time. It’s essential to understand that different parts of your jewelry piece may require varying levels of heat. Larger pieces need more heat, while smaller or delicate areas need a gentle touch. Don’t rush this process; take your time to heat evenly.

5. Use Third-Hand Tools and Binding Wire
These trusty sidekicks are indispensable for securing your jewelry pieces during soldering. The third-hand tool can hold your workpiece in place, leaving your hands free to manipulate the torch and solder. Binding wire is your invisible assistant, helping to align and support delicate elements during soldering.

6. Post-Soldering Care
Once your soldering is complete, it’s crucial to quench your jewelry piece in a pickling solution. This removes any remaining flux and oxides, leaving you with a clean, shiny piece. After pickling, give your creation a good scrub with a brass brush for that extra shine.

7. Practice Makes Perfect
Like any art, soldering takes time to master. It’s not uncommon to experience frustration in the beginning, but remember that practice is your best friend. Take on small projects, perfect your technique, and gradually work your way up to more complex designs.

Soldering is more than just a technical skill; it’s an art form that bridges the gap between separate elements and transforms them into a unified whole. My journey as a jewelry maker has been a series of sparks, flames, and, yes, occasional mishaps, but each experience has added to my skill and passion.

Solder Like a Pro with these great tips

Bezel Set Ring Tutorial

Torch Talk

Next Idea:

Comments

Have you read?

Categories